|
|
Blast Cabinet |
|
|
Blast Cabinet |
|
|
First Piece! Exhaust Clamp/Skid Plate Chrome Base/Candy Purple Topcoat |
|
|
Just finished baking! |
|
|
Chrome base/Candy Purple topcoat. |
|
|
Chrome base/Candy Purple topcoat. |
Powder Coating!
We just purchased a powder coat gun, IR Lamp, Bead Blaster, and we have a 40" Height X 38" Wide X 72" Long oven!!! We are now powder coating our own parts and maybe yours too! Both our bead blaster and oven will easily hold an ATV frame, 4X4 bumper, valve covers...and many other parts.
Email us for quotes...we will guarantee our work and provide the best possible value for your powder coating needs!
Shipping Address:
TRM Coatings
394190 W. 2900 Rd.
Ochelata, OK 74051
Email us for a quote: powder@rockinhorseweb.com
Prices below are for ATV parts and include sand, bead, or media blasting and prep. All gaskets, bearings, seals, etc. must be removed or will incur additional fees.
NOTE: Multiple part discounts available. It just stands to reason the more parts you send at one time the more efficiently and cost effectively we can coat your parts versus coating individual parts over time.
Single stage is just one coat/color (Super mirror black only for example).
Two stage is two coats/colors (Chrome base-coat and Candy Red top-coat for example or Yellow base coat and clear topcoat).
Three stage is three coats/colors (Chrome base-coat, Candy Red mid-coat and high gloss clear top-coat for example).
These prices are subject to change so check back often!!! Once a quote has been given it will be valid for 30 days. Below prices cover about 90% of the powders on the market...exotics such as glow in the dark powder, pearl powders, etc. incur additional fees.
| PART | SINGLE STAGE | TWO STAGE | THREE STAGE |
| A-Arms (Each) | $10 | $15 | $20 |
| Axle | $55 | $66 | $77 |
| Bumpers | $30 | $36 | $42 |
| Clutch Cover | $10 | $15 | $20 |
| Frame and Sub (if sent together) | $175 | $200 | $225 |
| Front Hubs (Each) | $15 | $20 | $25 |
| Grab Bars | $20 | $25 | $30 |
| Motor Mount Brackets (Each) | $3 | $5 | $7 |
| Rear Hubs (Each) | $15 | $20 | $25 |
| Rim (Each) | $20 | $25 | $30 |
| Rocker Cover | $20 | $25 | $30 |
| Shock Springs | $20 | $25 | $30 |
| Skid Plate | $40 | $48 | $56 |
| Spindles set of 2 | $20 | $25 | $30 |
| Steering Stem | $30 | $36 | $42 |
| Sub-Frame (sent alone) | $50 | $60 | $70 |
| Swing Arm | $60 | $70 | $80 |
| TDC Inspection Plug | $5 | $7 | $9 |
| Throttle Cover | $5 | $7 | $9 |
| Nerf Bars (set) | $50 | $60 | $70 |
| Kick Starter | $10 | $15 | $20 |
| Shifter / Brake pedal | $10 | $15 | $20 |
We have developed a gusset kit for the Honda TRX450R made of Chromoly steel and TIG welded.
Sand and Bead Blasting:
Sand blasting is $30/hour.
Bead Blasting is $60/hour.
Pictures:
|
|
|
|
|
|
||||